Show Ipv6 Ospf Neighbor; Show Ipv6 Ospf Virtual-Links - Zte ZXR10 Command Manual

Purpose
Command Modes
Syntax
Syntax
Description
Example
Purpose
Command Modes
Syntax
Syntax
Description
Instructions
Example

show ipv6 ospf neighbor

Use this command to display information about neighbors of the
OSPF instance .
All modes
show ipv6 ospf neighbor [<interface-name>|<neighbor-id>|
detail]
<interface-name>
<neighbor-id>
detail
This example describes how to display information about all
OSPFv3 neighbors:
ZXR10#show ipv6 ospf neighbor
OSPFv3 Process (1)
Neighbor ID Pri State
15.15.15.15 5 Full/DR
ZXR10#show ipv6 ospf neighbor detail
Neighbor 15.15.15.15, interface address
fe80:9::212:daff:fe88:7540
In the area 0.0.0.3 via interface fei_3/1
DR is 15.15.15.15 BDR is 156.1.1.1
Options is 0x000013 (-|R|-|-|E|V6)
Dead timer due in 00:00:36
Database Summary List 0
Link State Request List 0
Link State Retransmission List 0

show ipv6 ospf virtual-links

Use this command to display information about the virtual link of
OSPFv3 instances.
All modes
show ipv6 ospf virtual-links [<process-id>]
<process-id>
This command is used to show information about all virtual links,
including the establishment of links.
This example describes how to show information about the virtual
link of OSPFv3 instances.
XR10#show ipv6 ospf virtual-links
Virtual Link OSPF_VL0 to router 0.0.0.25 is down
Interface ID 2147483648, IPv6 address ::
Run as demand circuit
Transit area 0.0.0.1, via interface fei_1/5, Cost of using 10
Confidential and Proprietary Information of ZTE CORPORATION
Interface name
Neighbor identifier
Displays detailed information about neighbors
Dead Time Interface Instance ID
00:00:34 fei_3/1
OSPFv3 process identifier, range: 1~65535
Chapter 4 OSPFv3 Protocol
0
65