Debug Protocol Dhcp Client Enable/Disable; Debug Protocol Dhcp Client State Ipport - Zte ZXR10 2900E Series Command Reference Manual

Parameter
disable
Defaults
By default, the debug function of the DHCPv6 module is disabled.

4.47.2 debug protocol dhcp client enable/disable

Function
This command enables or disables the debug function of the DHCP client.
Mode
Global configuration
Syntax
debug protocol dhcp{enable | disable}
Parameters
Parameter
enable
disable
Defaults
By default, the debug function of the DHCP client is disabled.

4.47.3 debug protocol dhcp client state ipport

Function
This command shows the status of an ip port of the DHCP client.
Mode
Global configuration
Syntax
debug protocol dhcp client state ipport <0-63>
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Disables or disables the debug function of the DHCPv6 module.
Description
Enables the debug function of the DHCP client.
Disables the debug function of the DHCP client.
4-613
Chapter 4 Service Configuration
ZTE Proprietary and Confidential