File System Configuration Mode; Nas Configuration Mode; Cluster Management Configuration Mode - Zte ZXR10 2900E Series Command Reference Manual

2.1.5 File System Configuration Mode

In global configuration mode, you can run the config tffs command to enter file system
configuration mode, which is shown as follows:
zte(cfg)#config tffs
zte(cfg-tffs)#
In file system configuration mode, you can manage the file system of the switch, including:
l
Adding files or directories
l
Deleting files or directories
l
Modifying file names
l Displaying files or directories
l
Changing file directories
l
Uploading/downloading files through TFTP
l
Uploading/downloading files through FTP
l
Copying files
l
Formatting the Flash memory
l
Upgrading firmware
To return to global configuration mode from file system configuration mode, run the exit
command or press Ctrl-Z.

2.1.6 NAS Configuration Mode

In global configuration mode, you can run the config nas command to enter NAS
configuration mode, which is shown as follows:
zte(cfg)#config nas
zte(cfg-nas)#
In NAS configuration mode, you can configure the access service of the switch, including
user access authentication and management.
To return to global configuration mode from NAS configuration mode, run the exit command
or press Ctrl-Z.

2.1.7 Cluster Management Configuration Mode

In global configuration mode, you can run the config group command to enter cluster
management configuration mode, which is shown as follows:
zte(cfg)#config group
zte(cfg-group)#
In cluster management configuration mode, you can configure the cluster management
service of the switch.
To return to global configuration mode from cluster management configuration mode, run
the exit command or press Ctrl-Z.
SJ-20130731155059-003|2013-11-27 (R1.0)
2-3
ZTE Proprietary and Confidential
Chapter 2 Overview