Ingress-Acl Link Rule Type-Any; Clear Ingress-Acl Link - Zte ZXR10 2900E Series Command Reference Manual

Guidelines
Other rule can match non-IP/ARP packets with ether-type fields, dsap-ssap fields, cos
fields, VLAN fields, specified source MAC, any source MAC, specified destination MAC,
or any destination MAC.

4.13.23 ingress-acl link rule type-any

Purpose
This command sets the rule that the layer–2 ingress ACL matches specified cos and VLAN
ID.
Command Mode
Layer 2 ingress ACL configuration mode
Syntax
rule<1-500>{permit | deny} any [<vlan-id>[<vlan-mask>]][cos<0-7>][<source-mac><smac-ma
sk>| any][<dest-mac><dmac-mask>| any]
Parameter Description
Parameter
<1-500>
permit
deny
any
cos <0-7>
<vlan-id>
<vlan-mask>
Guidelines
Any rule can match VLAN field and cos field.

4.13.24 clear ingress-acl link

Purpose
This command clears a layer–2 ingress ACL instance.
SJ-20130731155059-003|2013-11-27 (R1.0)
Parameter
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule can match any packet.
This rule is only valid for the cos-specified message. Ignore this
rule for other messages. The range of cos is 0 to 7.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
Optional VLAN mask. The default value is 0xfff.
4-231
Chapter 4 Service Configuration
ZTE Proprietary and Confidential