Egress-Acl Link Rule Type-Other - Zte ZXR10 2900E Series Command Reference Manual

ZXR10 2900E Series Command Reference
Syntax
rule <1-500>{permit | deny} arp {[cos <0-7>][<vlan-id>[<vlan-mask>]][<dest-mac><dmac-mas
k>| any]}
Parameter Description
Parameter
<1-500>
permit
deny
arp
cos <0-7>
<vlan-id>
<vlan-mask>
<dest-mac>
<dmac-mask>
any
Guidelines
The ARP rule can match cos fields, VLAN fields, source-specified MACs, any source
MACs, destination-specified MACs, and any destination MACs.

4.13.59 egress-acl link rule type-other

Purpose
This command sets the rule that the layer–2 egress ACL matches the rule except IP/ARP.
Command Mode
Layer 2 egress ACL configuration mode
Syntax
rule <1-500>{permit | deny} other {[ether-type <1501-65535>| dsap-ssap <0-65535>][co
s <0-7>][<vlan-id>[<vlan-mask>]][<source-mac><smac-mask>| any][<dest-mac><dmac-mask>|
any]}
SJ-20130731155059-003|2013-11-27 (R1.0)
Description
Rule number.
If the condition matches, access is permitted.
If the condition matches, access is denied.
This rule is only valid for ARP packet. Non-ARP packet ignores
this rule.
This rule is only valid for the cos-specified message. Other
messages ignore this rule. The range of cos is 0 to 7.
This rule is only valid for messages with the specified VLAN ID.
Ignore this rule for other messages. The rule of VLAN ID is 1
to 4094.
Optional VLAN mask. The default value is 0xfff.
Destination MAC address of the transmitted packet.
Destination MAC mask.
The any keyword is used as the abbreviation of destination MAC
address 00.00.00.00.00.00 and mask 00.00.00.00.00.00.
4-270
ZTE Proprietary and Confidential