Entering A Memory Name - Icom IC-7610 Advanced Manual

7. MEMORY OPERATION

Entering a memory name

Except for the blank channels, you can assign a
name to all memory channels, including scan edges.
The names will be displayed along with the frequency,
mode and ilter number.
1. Display the MEMORY screen.
» MEMORY
MENU
2. Rotate to select the channel to enter a
MULTI
name. (Example: Memory channel 2)
3. Touch of the selected channel.
4. Touch "Edit Name."
5. Enter a name, and then touch [ENT].
(Example: #1DX Spot)
6. To close the MEMORY screen, push
Memory name
L The Memory name is not displayed when the Mini
scope screen or expanded screen is displayed.
L You can also select not to display the Memory name
on the standby screen.
» SET > Display > Memory Name
MENU
63
Memory name
.
EXIT