Entering A Memory Name; Clearing A Memory Channel - Icom IC-9700 Advanced Manual

4. MEMORY OPERATION

Entering a memory name

Except for the blank channels, you can assign a name
to all memory channels, including scan edges.
The names will be displayed along with the frequency,
mode and filter number.
1. Display the MEMORY screen.
» MEMORY
MENU
2. Rotate to select the channel to enter a
MULTI
name. (Example: Memory channel 2)
3. Touch of the selected channel.
4. Touch "Edit Name."
L Touch "Memory Clear" to clear any memory contents
and name.
5. Enter a name, and then touch [ENT].
(Example: CQ)
L See "Keyboard entering and editing" in the BASIC
MANUAL for details.
6. To close the MEMORY screen, push
L The Memory name is not displayed when the
Mini scope screen (p. 5-2) or expanded screen is
displayed.
L You can also select not to display the Memory name
on the standby screen.
» SET > Display > Memory Name
MENU

Clearing a memory channel

You can clear a no-longer-used memory channel and
reset it as a blank channel, except for the program
channels (1A/1B ~ 3A/3B) and Call channels (C1 and
C2).
1. Push
2. Push
3. Rotate
4. Touch the channel number.
5. Touch [M-CLR] for 1 second to clear the memory
6. To close the VFO/MEMORY screen, push
.
EXIT
Memory name
4-4
to select the Memory mode.
V/M
.
kHz
M-CH
to select the channel to clear.
MULTI
(Example: Memory channel 2)
channel.
.
EXIT