Entering A Memory, Bank, Or Program Scan Name; D Entering A Name - Icom ID-31A PLUS Advanced Manual

7
MEMORY OPERATION

Entering a Memory, Bank, or Program Scan name

You can enter an alphanumeric name for Memory
channels, Call channels, Banks, or Program Scans�
Names can be a maximum of 16 characters�

D Entering a name

Example: Entering a Memory name "CALLING" to a
Memory channel 000 (440�000 MHz)�
1� Push [M/CALL] to enter the Memory mode�
2� Hold down [S�MW] for 1 second�
• Enters the Select Memory Write mode�
• The Memory channel number blinks�
3� Rotate [DIAL] to select a Memory channel�
4� Push [QUICK]�
5� Select "Edit�"
• The Edit screen is displayed�
6� Select an option�
▼
• MEMORY NAME screen is displayed�
Blinks
[Up]
[ENT]
[Down]
(Example: "MNAME�")
TIP: The type of name you can enter is different
depending on the selected Memory channel�
• 000 ~ 499, C0, C1: "MNAME" is displayed to
• 00A/00B ~ 24A/24B: "SNAME" is also displayed to
• Bank channels:
7� Enter a name and push [ENT]�
• Returns to the Edit screen and the entered name is
displayed�
L See page iii on how to enter characters�
8� Select "<<Write>>�"
• The confirmation dialog is displayed.
9� Select <YES>�
▼
• Returns to the Memory mode�
7-9
enter a Memory channel
name or Call channel name�
enter a Program Scan name�
"BNAME" is also displayed
to enter a Bank name� The
option is displayed only when
the selected Memory channel
is assigned to a Bank�