Entering A Memory Name; About The Memory Screen - Icom ic-7300 Full Manual

9
MEMORY OPERATION

Entering a memory name

You can assign a name of up to 10 characters to all
memory channels, including scan edges.
You can use upper case letters, lower case letters,
numbers, some symbols and spaces.
The names you enter will be displayed along with the
memory channel contents.
[Example: Entering "Icom 01" in Memory channel 2]
1. Open the MEMORY screen.
» MEMORY
MENU
2. Select the desired memory channel to enter a
name.
L You can only select a channel with memory contents.
3. While Memory channel 2 is selected, touch
• The QUICK MENU screen is displayed.
4. Select "Edit Name."
• The "MEMORY NAME" editing screen is displayed.
5. Enter a name of up to 10 characters.
L See "Keyboard entering and editing" (p. 1-8) for
details.
6. Touch [ENT] to save the entered name.
• The MEMORY NAME screen closes and returns to the
MEMORY screen.
• The entered name is displayed.
L The memory name is also displayed on the Standby
mode screen.

About the MEMORY screen

q Frequency
w Operating mode
Rotate
e Memory menu
.
QUICK
r Memory name
Rotate
t Select memory icon
Push
y Memory channel number
Memory name
9-5
q w
y
t
r
Displays the entered frequency.
Displays the selected operating mode.
Touch to display the MEMORY MENU.
L You can select between "Edit Name," "Memory Write"
and "Memory Clear" is selectable.
Displays the memory name, if entered.
LSee the left column for details.
Touch this icon to set the select number "1,"
"2," "3" or OFF.
L You can also touch the icon for 1 second to display
the SELECT ALL CLEAR screen, and then select the
desired item to reset the select number.
Displays the memory channel number.
L"P1" or "P2" is displayed for the Scan Edge
memory channels.
e