H3C S9500 Series Operation Manual page 717

Operation Manual – PIM
H3C S9500 Series Routing Switches
1.3 Displaying and Debugging PIM-DM
Display the PIM multicast
routing table
Display the PIM interface
information
Display the information
about PIM neighboring
routers
Display BSR information
Display RP information
Enable the PIM
debugging
Disable the PIM
debugging
Enable the PIM-DM
debugging
Disable the PIM-DM
debugging
1.4 PIM-DM Configuration Example
I. Network requirements
Receivers receive information through multicast. The entire PIM domain operates
in the dense mode.
As shown in
networks N1 and N2.
To do...
display pim routing-table [ { { *g
[ group-address [ mask { mask-length
| mask } ] ] | **rp [ rp-address [ mask
{ mask-length | mask } ] ] } |
{ group-address [ mask { mask-length
| mask } ] | source-address [ mask
{ mask-length | mask } ] } * } |
incoming-interface interface-type
interface-number | null } |
{ dense-mode | sparse-mode } ] *
display pim interface [ Vlan-interface
Vlan-interface-number ]
display pim neighbor [ interface
Vlan-interface
Vlan-interface-number ]
display pim bsr-info
display pim rp-info [ group-address ]
debugging pim common { all | event
| packet | timer }
undo debugging pim common { all |
event | packet | timer }
debugging pim dm { alert | all | mbr |
mrt | timer | warning | { recv | send }
{ all | assert | graft | graft-ack | join |
prune } }
undo debugging pim dm { alert | all |
mbr | mrt | timer | warning | { recv |
send } { all | assert | graft | graft-ack
| join | prune } }
Figure 1-2, Host A and Host C are multicast receivers in two stub
Chapter 1 PIM-DM Configuration
Use the command...
1-7
Remarks
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
any view
Available in
user view
Available in
user view
Available in
user view
Available in
user view