Deleting - Siemens SINUMERIK 840Di sl Operating Manual

7
01/2008
Copy
Programs/
data
NC card
USB local
Floppy disk
Paste
NC card

7.2.4 Deleting

File
Directory
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
A second window for the target directory (see title in window) is
opened.
If available, select the target device via the vertical softkeys.
The contents of "Programs/data" are displayed.
Archive files or complete directories can be copied from an existing
NC card.
You can use the "Local USB" softkey to access the USB interface on
the front panel. This is activated as soon as a USB memory has been
plugged in and recognized.
If a diskette drive is installed, you can copy to or from diskette. The
diskette contents are displayed. Select a target directory.
The source files are copied to the target directory you have selected.
On SINUMERIK solution line, the NC card softkey has the same
functionality after pressing the expansion key.
With this copying action in operating area "Services" the names
remain unchanged.
See Chapter "Copy/Insert" in the "Program" operating area.
Function
You can delete a single file or a group of files (multiple selection).
You can delete a directory and all its contents.
The system settings relating to deletion determine whether a prompt
appears before files/directories/data are finally deleted.
See Chapter "Commissioning operating area"
Services operating area
7.2 Managing data
7
7-369