Miscellaneous Setting Data - Siemens SINUMERIK 840Di sl Operating Manual

5
01/2008

5.5.6 Miscellaneous setting data

Setting
data
Misc.
General
SD
Channel-
specific SD
Axis-
specific SD
Find
Find
next
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Function
All the setting data in the control are displayed in tabular form sorted
according to general (i.e., NCK-specific), channel-specific and axis-
specific setting data. The table contains both the setting data on the
vertical softkeys such as working area limitation, Jog data etc., as well
as special setting data such as software cam, oscillation,
compensation, etc.
Sequence of operations
Press the "Setting data" softkey.
The vertical softkey bar changes.
Display setting data:
Press the "Misc." softkey.
The horizontal and vertical softkey bars change.
Select the type:
• The "General setting data ($SN_)" window appears.
• The "Channel-specific setting data ($SC_)" window appears.
• The "Axis-specific setting data ($SA_)" window appears.
The current setting data of the corresponding type $SN_, $SC_or
$SA_ are displayed.
Use the PageUp / PageDown keys to browse forward / backward.
Find setting data:
Enter the setting data you wish to find in the "Find" window (initial ID is
sufficient).
If several setting data have the same initial identifier, you can display
other setting data by selecting the "Find next" softkey.
Edit setting data:
Position the cursor bar on the appropriate input field and enter a new
value.
Parameters operating area
5.5 Setting data
5
5-227