Siemens SINUMERIK 840Di sl Operating Manual page 259
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Programming manual (560 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
6
01/2008
Find/
Go to...
Find/
Go to...
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
6.3
Dual ASCII editor
If you are positioned on a subprogram call in the ASCII editor, this
View
program is loaded to the second editor when you press the "View
subprogr.
subprogram" softkey.
This function is only available in the ASCII editor.
Synchronized view in the dual ASCII editor
You can view instruction groups in the ASCII editor. Position the
Synchron.
cursor on a WAIT marker instruction in one of the two ASCII editors.
WAIT
Press the "Synchron. WAIT markers" softkey. This string is sought in
the second editor and displayed at the same height in the window as
the cursor in the first editor. The focus remains in the first editor.
If no WAIT marker instruction is found together with its brackets, the
next WAIT marker instruction is displayed in the adjacent window
regardless of the brackets.
Edit programs iin the standard ASCII Editor
"Program" operating area
6-259
6
Advertisement
Table of Contents
