Siemens SINUMERIK 840Di sl Operating Manual page 359

7
01/2008
7.1 Services main screen
The diagram shows the status
of the SINUMERIK
solutionline:
Name
Type
Loaded
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
The "Services" Operating Area provides the following functions:
• Read data in/out
• Manage data
• Series commissioning
All programs/data stored on the hard disk or in the NC memory are
listed in the "Services" main screen.
Display of the current file tree:
The following file attributes can be displayed for each file (depending
on the default setting):
Directory name/file name
Files with a maximum name length of 25 characters can be managed.
Specifies the file type which matches the file identifier.
To execute a program in the NC (through NC Start), it must be loaded
into the NC main memory. To ensure that the memory does not
become overloaded, however, related programs and data can be
loaded explicitly (from the hard disk to the NC memory) and unloaded
again (from NC memory back to hard disk).
The current status of a file is indicated by an "X" in a column under
"Loaded": File loaded, file can be selected and executed with an NC
Start.
Services operating area
7.1 Services main screen
7
7-359