New Workpiece/Part Program - Siemens SINUMERIK 840Di sl Operating Manual

6
01/2008

6.9.1 New workpiece/part program

Work-
pieces
Part
programs
Sub-
programs
User
cycles
Clipboard
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Please note that on the directories:
comments \COM.DIR and definitions \DEF.DIR can only be
accessed in the Services operating area via "Manage data".
Function
The following subsection describes how you can select workpieces
and part programs in a directory. A selected file can then be called
and edited in the text editor.
Sequence of operations
Select workpiece/part program:
• Workpieces
• Part programs
• Subprograms
• User cycles
• Clipboard
Position the cursor in the directory on the desired file. For each file,
the file name, file type, length, date of creation/last change are
displayed.
You can change the properties of the file display (see Section
"Commissioning", "Settings" menu)
Call a part program:
Use the cursor to select a program in the program overview and press
the "Input" key.
The text editor is displayed with the file you have selected.
You can now edit the part program.
"Program" operating area
6.9 Managing programs
6
6-339