5
01/2008
5.5.4 Dry run feedrate for dry run operation DRY
Setting
data
Feedrate
DRY
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Function
The feedrate entered here is used in the active program instead of the
programmed feedrate when the function "Dry run feedrate" (program
control) is selected in "Automatic" mode.
Sequence of operations
Press the "Setting data" softkey.
The vertical softkey bar changes.
Press the "Feedrate DRY" softkey.
The "Dry run feedrate" window is opened.
Edit the dry run feedrate:
Enter a new value.
Parameters operating area
5.5
Setting data
5
5-225