Deleting - Siemens SINUMERIK 840Di sl Operating Manual

6
01/2008

6.9.8 Deleting

Manage
program
Delete
OK
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Function
This section explains how you can delete workpieces or files.
Sequence of operations
The "Manage programs" softkey must be pressed.
Position the cursor on the workpiece or the file you want to delete.
Delete several files:
If you wish to select several files, position the cursor on the first file,
press the "Select" key and then position the cursor on the last file.
The files you have selected are highlighted.
The prompt "Do you really want to delete the file?" appears.
Confirm your input.
Additional information
• You can only delete programs that are not currently running.
• If you want to delete a workpiece directory, make sure that none of
the programs it contains is currently selected.
• If a workpiece directory is deleted, all the files that it contains are
deleted at the same time.
"Program" operating area
6.9 Managing programs
6
6-351