Simulation Settings - Siemens SINUMERIK 840Di sl Operating Manual

6
01/2008

6.8.2 Simulation settings

"Settings..." menu
Load
standard
Options Options
or
on/off on/off
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Only accessible from the RESET or STOP state of the simulation
(e.g., single block mode)
Other settings can only be displayed/hidden if you enter a valid
password via the "Options" softkey.
Load manufacturer-specific default settings
(See data management: \DP.DIR\SIM.DIR\SIMINI_M.COM for milling
or
SIMINI_T.COM for turning and differential files in the \USER directory.
Display/hide optional setting parameters in the current window,
(Initial setting is options off)
The default values can be modified according to the manufacturer's
Change
requirements if a valid password is entered.
default
The changes to the manufacturer-specific default set values in files
"SIMINI_M.COM" and "SIMINI_T.COM" are used as differential
parameters in the files "DPMWP.INI" and "DPTWP.INI" in the \USER
directory and taken into account for all new workpieces.
With the correct password, you can set the desired computation mode
Downtime
for secondary times and selectively define estimated secondary times
settings
for the NC functions T, S, M and H.
Settable parameters: See Chapter "Downtime settings"
The input screen has been changed to enable selection between the
machine data and an individual tool change time (as previously).
"Program" operating area
6.8 Program simulation
6
6-325