Optimization/Test (Sinumerik Powerline) - Siemens SINUMERIK 840Di sl Operating Manual

9
Commissioning operating area
9.5

Optimization/test (SINUMERIK powerline)

9.5

Optimization/test (SINUMERIK powerline)

References
Start-up
Measuring
parameters
References
9-436
Function
This menu contains functions for commissioning the axes:
• Current control loop
• Speed control loop
• Position control loop
• Function generator
• Circularity test
• Servo trace
• AM/MSD self-optimization (inactive)
• DAC configuration (inactive)
Expanded softkey bar:
• Aut. selector setting
Servo trace involves the recording of up to 10 bit signals throughout
the measuring time for bit-encoded Safety Integrated signals.
/FBA/ Function Manual Drive Functions
/FBSI/ Function Manual Safety Integrated
Measurement of coupled axes
For commissioning SIMODRIVE 611 digital drives, coupled axes are
supported for measuring in the current control loop, speed control loop
or position control loop:
• Pure gantry axis groupings
• Pure master/slave relationships
• Hybrid coupling of master/slave axes with gantry axes
You can enter specific measuring parameters and select a
measurement for each available axis in these axis groupings.
The following measuring parameters are available:
• Amplitude leading axis or master axis
• Amplitude synchronized axis/axes or slave axis/axes
• Bandwidth of the frequency range to be analyzed
• Information on measuring accuracy and measurement duration
increase
• Delay settling time
• OFFSET to accelerate via an acceleration ramp
/IAD/ Commissioning Manual:
Section "Measuring functions for coupled axes"
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
9
01/2008
© Siemens AG 2008 All rights reserved.