Grinding Data Expansion - Siemens SINUMERIK 840Di sl Operating Manual

5
Parameters operating area
5.3 Tool management

5.3.4 Grinding data expansion

5-198
Function
If the selected tool is a grinding tool, a vertical softkey 6 "Grinding
parameters" is provided in the following:
• Tool details main screen
• Tool details cutting edge data (sub)screen
• Tool details monitoring data (sub)screen
When this softkey is pressed, a display appears where grinding
parameters can be:
• Display
• Edit
This display contains the following:
Top section:
- Tool name
- Duplo number
- Type
- Cutting edge navigation bar
as in the "Cutting edge data" display for tool details
(The data is only displayed and cannot be modified)
Middle section:
The data correspond to the system variables entered for grinding.
Variable for
Spindle number
Chaining rule
Minimum wheel radius
Minimum wheel width
Current wheel width
Maximum speed
Maximum peripheral speed
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
01/2008
Unit Name of identifier
- $TC_TPG1
- $TC_TPG2
[mm, in] $TC_TPG3
[mm, in] $TC_TPG4
[mm, in] $TC_TPG5
[rpm] $TC_TPG6
[m/s, ft/s] $TC_TPG7
© Siemens AG 2008 All rights reserved.
5