Using The V.24 Interface - Siemens SINUMERIK 840Di sl Operating Manual

7
Services operating area
7.5 V.24 interface

7.5.2 Using the V.24 interface

V.24 interface
Vertical softkey bar
"Interface" softkey
"Standard values"
softkey
"V.24" softkey
"PG" softkey
"Manage" softkey
"Abort" softkey
7-386
Function
You can output files to an external device or download files from there
via the V.24 interface. The V.24 interface and your device must be
matched with one another. The control provides you with an
appropriate input screen form in which you can define the specific
data for your device.
For each V.24 interface, you can define a parameterization:
• V.24
• PG/PC
Sequence of operations
Press the "Interface" softkey. The vertical softkey bar changes. Select
the interface that you wish to parameterize.
The default values for "V.24 interface" or "PG interface" are accepted,
depending on which interface has been selected for parameterization.
If a file has been assigned to the interface, then this assignment is
cancelled. The file name is removed from the softkey.
V.24 (default setting): If a parameter file is assigned to the current
interface, then instead of V.24, the name of this file is displayed.
Programming device/PC: If a parameter file is assigned to the current
interface, then instead of the PG, the name of this file is displayed.
An additional screen form can be selected with which V.24 parameter
files can be set-up, deleted, copied, assigned and displayed.
Refer to the Manage sub-item
Back to the previous screen form
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
7
01/2008
© Siemens AG 2008 All rights reserved.