Siemens SINUMERIK 840Di sl Operating Manual page 257

Hide thumbs Also See for SINUMERIK 840Di sl:
Table of Contents

Advertisement

6
01/2008
Standard
cycles
User
cycles
Manufact.
cycles
Log
Softkey definitions
New...
Load
HD->NC
Unload
NC->HD
Simulation
Manage
programs...
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Select the "Standard cycles" softkey to display a list of the cycles that
Siemens has added. See softkey definitions.
Select the "User cycles" softkey to display a list of the user cycles that
you have added.
Select the "Manufacturer cycles" softkey to display a list of the cycles
that have been integrated by the manufacturer.
After pressing the "ETC" key and the "Log" softkey, you can display
the log of error messages for errors which occurred during "Copy",
"Rename", "Load", etc.
If external network drives are configured for the control, the softkeys
for these drives replace the "Standard cycles", "User cycles" and
"Manufacturer cycles" softkeys. If you have configured four softkeys,
the fourth one is displayed in the More bar when you press the "ETC"
key. If network drives are configured, the "Standard cycles", "User
cycles" and "Manufacturer cycles" softkeys also appear in the More
bar after pressing the "ETC" key.
Vertical softkeys
Creates a new file for a workpiece/part program.
If activated templates exist for the created data type, they are
proposed. If they are accepted, the copy of the template becomes the
created object.
The highlighted program (or programs) is (are) loaded from the hard
disk to the NC memory.
The highlighted program is unloaded from the NC memory to the hard
disk.
With the function "Simulation" you can display axis movements
graphically and simulate the results of machining on the screen.
With the "Manage programs" softkey you can manage the functions
"New", "Copy", "Insert", "Delete", "Rename" and "Enable".
"Program" operating area
6.2
Main screen program
6
6-257

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840d slSinumerik 840d

Table of Contents