Service Si (Safety Integrated) - Siemens SINUMERIK 840Di sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Programming manual (560 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
8
Diagnostics operating area
8.4
Service displays
8.4.3 Service SI (Safety Integrated)
Service
displays
"Service SI" softkey
Axis +
Axes -
Direct
selection...
References
8-400
Sequence of operations
Select the menu "Service displays".
The horizontal softkey bar changes.
The "Service SI" window displays information about Safety Integrated
data together with the associated axis name and axis number.
The axis +, axis – vertical softkeys or direct selection are used to set
the desired axis. The active axis is displayed in the top right half of the
table.
You can page up and down with the "Page" keys.
/FBSI/
Description of Functions Safety Integrated and
/FBSIsl/ Function Manual Safety Integrated
Function
The following information blocks on Safety Integrated data are offered
for the selected axis by pressing the "Service SI" softkey:
• Status SI (default setting)
• Cam SGA
• SGE/SGA
• SPL
• SI communication
• SI configuration
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
8
01/2008
© Siemens AG 2008 All rights reserved.
Advertisement
Table of Contents
