Siemens SINUMERIK 840Di sl Operating Manual page 402

8
Diagnostics operating area
8.4 Service displays
"Cam SGA" softkey
"SGE/SGA" softkey
8-402
Using this softkey you can select the display of "cam SGA" signals.
Cam synchronization is executed between NCK and PLC at the cam
SGA.
Using this softkey, you can display the signals of the safety-relevant
inputs and outputs.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
8
01/2008
© Siemens AG 2008 All rights reserved.