Siemens SINUMERIK 840Di sl Operating Manual page 41

2
01/2008
Virtual keyboard
Language changeover
Calibrating touch panel
References
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
The virtual keyboard is displayed from the active operator area. The
keyboard is automatically hidden again when changing the area or
when exiting the application. The virtual keyboard is located across
the complete header and can be shifted using the mouse.
The following languages can be selected for the virtual keyboard
online: German, English, French, Spanish.
The virtual keyboard can be displayed and hidden in all operator
areas using a touch field located above the vertical softkeys. This
touch field is only displayed if the connected HT 8 or Touch Panel has
operator rights.
To perform calibration, press the keys <Recall> + <MENU SELECT>
simultaneously to start the command shell:
1. The "Calibrate TouchPanel" button starts calibration.
2. Follow the instructions on the screen and touch the three
calibration points one after the other.
This completes the calibration.
3. Then press the horizontal softkey or button "1" to make the
connection to the required PCU and return to the HMI-Advanced
user interface.
"Operator Components and Networking" Manual
Operator Components/Operating Sequences
2.3 SINUMERIK HT 8
2
2-41