Siemens SINUMERIK 840Di sl Operating Manual page 196

5
Parameters operating area
5.3 Tool management
Symbols /
5-196
The G56 reset value is TOWMCS
$SC_WEAR_TRANSFORM is set.
The current tool for channel "REV2" is indicated in row 2. The current
value of G56 on channel "REV2" deviates from the G56 reset value
( ).
Row 11 displays the current tool for channel "HAND". There the
current value of G56 is equal to the reset value (
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
01/2008
/ and
).
© Siemens AG 2008 All rights reserved.
5