Cycle Version Output; Displaying Loadable Compile Cycles - Siemens SINUMERIK 840Di sl Operating Manual

8
01/2008

8.5.3 Cycle version output

Service
displays
Versions

8.5.4 Displaying loadable compile cycles

Loadable compile cycles
Service
displays
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Function
You can save the contents of the version displays for cycles in a
separate log file.
Sequence of operations
To create a separate log file for the following version contents, press
the "Save versions" vertical softkey in the "Version data type cycles"
version display:
File:
CYP.COM
Cycle
CYP_DET.COM
version
ALLCYCLE.COM
CUS.COM
Save
versions
CMA.COM
CST.COM
When the data have been saved, the following message appears:
"File stored!" "
xxx stands for the file name preceding the extension .COM for
each type.
Function
Loadable compile cycles (CC) are an optional extra. The functionality
must be enabled explicitly. If loadable compile cycles are available on
your NCK, you can display them in a separate "Version data cycles"
display under Service displays/Version/Compile cycles.
Sequence of operations
Compile cycles are loaded when you initiate an NCU reset and can
then be displayed under Service displays/Version/Compile cycles.
8.5 Calling theversion screen
Type:
Package overview
Details
All cycles
User cycles
Manufacturer cycles
Standard cycles
Services:\Diagnostics\LogFiles\xxx.com.
Diagnostics operating area
8
8-419