Siemens SINUMERIK 840Di sl Operating Manual page 273

6
01/2008
Time-proportional view
Properties
Precondition for time-
proportional view
Synchronized view
Sychron.
view
Properties
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
6.5 Multi-channel step sequence programming (option)
Steps are displayed in the left window in proportion to the duration of
their execution time. In the case of WAIT markers, the step length
(i.e., the number of pixels in height is changed) is displayed in
proportion to the waiting time.
Timing by means of the execution of the workpiece program must
have been performed. If timing has not been performed, the
standardized view is displayed.
Programs which have been modified following timing are marked with
"Data modified".
Computing the time again sets all programs to "Data updated".
The icons are displayed in a fixed size regardless of the time required
for the step. The grouped synchronization steps are displayed in
parallel with the channels (horizontal to one another) and filled with
empty steps if the number of steps is uneven.
After switching to synchronized view, the data of all programs are
"Program" operating area
6-273
6