Program Overview - Siemens SINUMERIK 840Di sl Operating Manual

4
Machine operating area
4.6 Automatic mode

4.6.2 Program overview

Program
overview
Selection
Change
enable
Work-
pieces
Part
programs
Sub-
programs
Standard
cycles
4-134
Function
After selection of a workpiece or program overview, individual
workpieces or programs can be enabled or disabled for execution.
Sequence of operations
"AUTO" mode is selected in the "Machine" operating area.
The appropriate channel is selected.
The channel is in reset state.
The workpiece/program to be selected is in the memory.
An overview of all workpiece directories/programs that exist is
displayed.
Position the cursor on the desired workpiece/program.
Vertical softkeys
Select the workpiece/program for execution:
The name of the selected workpiece is displayed on the screen in the
"Program name" field at the top. The program is also loaded and
selected for processing.
The selected workpiece/program is enabled
(X) or disabled (no "X").
A selection can only be made when the workpiece/program is
enabled.
Explanation of other softkeys:
All existing programs of a particular type are displayed via the
horizontal softkeys:
Display of all existing workpiece directories
Display of all existing part programs
Display of all existing subprograms
Display of all existing standard cycles
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
4
01/2008
© Siemens AG 2008 All rights reserved.