Unload - Siemens SINUMERIK 840Di sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Programming manual (560 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
5
Parameters operating area
5.3
Tool management
Tool list
Load
Find empty
location
Abort
Start
5.3.6 Unload
Tool
managem.
5-204
Sequence of operations (loading from the "Tool list")
The "Tool list" is selected.
The appropriate tool is selected.
Press the "Load" softkey.
The vertical softkey bar changes.
Search for an empty location for a tool which has already been
created or enter the desired location and magazine number in the list.
The location found is entered under the magazine/location number.
The loading operation is not initiated.
The main screen appears.
The loading operation is initiated.
Function
This function allows you to unload a selected tool and to save its data.
Sequence of operations
Press the "Tool management" softkey.
The "Magazine list" is displayed.
The horizontal and vertical softkey bars change.
You can unload a tool from the "Magazine list" or the "Tool list".
The sequence of operations is the same for both methods.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
5
01/2008
© Siemens AG 2008 All rights reserved.
Advertisement
Table of Contents
