Siemens SINUMERIK 840Di sl Operating Manual page 188

5
Parameters operating area
5.3 Tool management
Search &
position.
Next
magazine
(Names assigned by
user)
Tool
list 1
Tool
list 2
Tool
list 3
Tool details
Tool
from CC
Tool in
cabinet
5-188
The "Find tool/location" window appears.
• Search
− Tool:
Enter the tool name and Duplo number and start the search
with OK.
The cursor is positioned on the tool found.
− Location:
Enter the magazine and location number and start the search
with OK.
The cursor is positioned on the tool found.
• Positioning
Select the "Position" softkey,
tool/location is moved to loading point. If there is more than one
possible loading point, a window is opened. You can select the
correct one with the cursor.
The locations of the next magazine are displayed in the magazine list.
You can only scroll forwards. When you reach the last magazine, the
display returns to the first magazine.
Vertical softkeys (tool list)
Selection of a table structure configured by the user
(if configured), e.g.:
• General data
• Geometry data
• Wear data
You can display and edit the complete data of a tool (as in the
magazine list).
The tool data are read from a code carrier and entered in the tool list
(you can then edit the data).
Select the tool in the tool cabinet.
The tool data are read from there and entered in the tool list.
A list display appears for which you can parameterize a filter for the
tool number, duplo number and tool type. The list displays all the tools
that fulfill the filter criteria. You can select the tool you require from the
list.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
5
01/2008
© Siemens AG 2008 All rights reserved.