Reading-Out Data - Siemens SINUMERIK 840Di sl Operating Manual
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Programming manual (560 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
7
01/2008
Data in
Floppy disk
Archives
NC card
7.1.2 Reading-out data
Data from
Floppy disk
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Sequence of operations
The "Programs/Data" file tree is displayed.
The vertical softkey bar changes.
Mark the file into which you wish to read the archive.
Select the source area (see title in window):
• Diskette drive: Shows the contents of the diskette. Select the
archive you wish to import.
• Opens the "Archives" directory on the hard disk. Select the archive
you wish to import.
• The contents of the archives directory on the NC card are
displayed. Select the archive you wish to import.
Function
Create archives:
With the "Data out" function, the source area (see title in window) for
data transmission is the displayed directory tree.
Possible target areas are:
•
The "Archives" directory on the hard disk
•
USB memory module
•
A diskette drive
•
Free memory areas on the NC card.
Sequence of operations
The "Programs/Data" file tree is displayed.
The vertical softkey bar changes.
You have marked the data that you wish to save/archive.
Select the target area (see title in window):
• Diskette drive: The diskette contents are displayed.
Enter the name of the new archive file.
Services operating area
7.1
Services main screen
7
7-363
Advertisement
Table of Contents
