Siemens SINUMERIK 840Di sl Operating Manual page 265
Hide thumbs
Also See for SINUMERIK 840Di sl:
- Commissioning manual (632 pages) ,
- Programming manual (560 pages) ,
- Function manual (274 pages)
Table of Contents
Advertisement
6
01/2008
References
Select step sequence display When requested via the softkey, the part program in the editor is
Sequence
and
OK
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
For more information, please refer to:
• IAM / IM4, Chapter "Configuring settings using INI files" for the
SEDITOR.INI file
• /PGA/ Programming Guide Advanced, Chapter "File and program
management" for the SEFORM instruction
displayed in steps.
To display a program selected in the editor in step sequence format,
press the "Sequence" horizontal softkey in the expanded softkey bar.
A new program only displays the empty step "End". The new program
steps must be inserted before this step.
Additional information
•
If a program contains a SEFORM instruction in the first 500 lines,
step sequence display is automatically activated after opening.
•
If you switch over to the dual editor, step sequence display is
applied to both editor panes. When you switch back to the ASCII
editor, both panes change to ASCII display.
•
Combined step sequence and ASCII editor view is not supported.
•
Options are required, if you wish to edit a program with SEFORM
instructions in anything other than the ASCII editor.
Sequence of operations
Operation is virtually identical to that of the ASCII editor; the only
different key functions for the step editor are:
•
Steps such as G code and WAIT markers are opened with the
Edit
ASCII editor.
Recompile
•
All standard cycles and contours can be recompiled.
Press INSERT to insert a new step before the currently selected step.
The editor window is automatically opened. The new step becomes
visible in the step sequence display via the step name and - if
configured - the associated icons.
Default text is free DIN code with G icons. New steps are added using
cycle support.
Each new work step which is started on the same level with SEFORM,
is the end of the preceding work step for this level.
Instead of the step name strings you can also write the text numbers
which are used in the file with the configured (alarm) texts. Enter them
in the format $8xxxx. They are then displayed in the currently active
language.
6.4
Structured step sequence display (option)
"Program" operating area
6-265
6
Advertisement
Table of Contents
