Displaying/Editing Tool Data - Siemens SINUMERIK 840Di sl Operating Manual

Hide thumbs Also See for SINUMERIK 840Di sl:
Table of Contents

Advertisement

5
01/2008

5.3.2 Displaying/editing tool data

Tool
managem.
Magazine
list
Tool list
Working
offset
Tool details
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Function
You can view and edit the tool data of the tool selected in the lists.
You can edit the following cutting edge data:
• Corrective values
• Monitoring data
• User data
Sequence of operations
Press the "Tool management" softkey.
The list configured by the machine manufacturer appears (e.g., the
magazine list). The horizontal and vertical softkey bars change.
Select the appropriate list via softkey:
• "Magazine list"
• "Tool list"
• "Working offset list"
Position the cursor bar on the appropriate tool. The tool is selected.
Notice:
Please ensure that the channel in which the offsets are to be applied
is displayed.
Select the "Tool details" softkey.
The input screen for "Tool details" appears.
The vertical softkey bar changes again.
The following functions are available:
• Create new cutting edges
• Edit cutting edge data
• Edit monitoring data
• Edit local offsets (DL numbers)
• Delete cutting edges
Parameters operating area
5.3
Tool management
5
5-191

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sinumerik 840d slSinumerik 840d

Table of Contents