Siemens SINUMERIK 840Di sl Operating Manual page 28

2
Operator Components/Operating Sequences
2.1 Operator panel front
*
*
"PROGRAM" hardkey
2-28
Program management program overview
A program can be opened in the text editor.
Interrupt
screen
User key
Notes
The keys marked with an * also have a function in conjunction with
ShopMill/ShopTurn.
For this function to work, at least one recently edited program must be
found with sufficient read rights. The program must not be already
open in either a simulation or any other application. Actions such as
load, copy, select, etc. must not be in progress and the part program
must not be running on the NC.
In the above cases, the operation is denied with alarms 1203xx.
Press this hardkey in any operating area to reopen and display the
part program or file last edited in the Program operating area:
• If you are already in the Program operating area and the editor is
open, the program you last edited is displayed.
• If you are in any other operating area, and the editor is open, you
jump back to the editor in the Program operating area and the
most recent editor status is displayed.
If the editor is not open:
• If you are in another user application, you jump back to the
Program operating area and the editor is opened with the program
you last edited.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Takes you directly to the Alarms
Can be configured by the customer
© S iemens AG 2008 All rights reserved.
2
01/2008