Select Operand Screens For Plc Status - Siemens SINUMERIK 840Di sl Operating Manual

8
01/2008

8.6.3 Select operand screens for PLC status

Diagnostics
bzw.
PLC
File
functions
Delete
Save
Load
Error
log
Editor
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Function
You can save the operands entered in the "PLC status" window to a
file or read in a back-up list of operands.
Sequence of operations
The "Commissioning" operating area is selected.
Start-
up
Press the "PLC" softkey.
The horizontal and vertical softkey bars change.
Press the "File functions" softkey.
The vertical softkey bar changes.
Enter the name of the file in which you wish to save the operands.
You can select existing back-up files from a list.
All the following functions refer to the file name entered:
The selected operand back-up file is deleted.
The selected operands are saved to the specified file.
The selected operand file is loaded to the "PLC status" window for
processing.
If errors occur during transfer of the machine data, these are entered
in an error log.
The error log is transfer-specific, i.e. it is cleared before each new
transfer.
The ASCII editor is called with the selected file.
You can now edit the operand back-up file.
Diagnostics operating area
8.6 Interrogating the PLC status
8
8-427