Siemens SINUMERIK 840Di sl Operating Manual page 71

2
01/2008
New
© S iemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Creating the file "Workpiece.JOB" (z.B. SHAFT.JOB)
There are various methods by which job lists can be created:
• While creating a workpiece directory with the function "New",
generate a standard job list as a file in this workpiece. The job list
syntax is included as a comment in this standard job list.
The "Create templates for job list" field under "Startup/HMI/System
settings/Templates" must first be checked.
With this method, the file is automatically assigned the name of the
relevant workpiece directory, Workpiece.JOB (e.g. SHAFT.JOB).
• Create job lists with different names in an existing workpiece
directory with the function "New".
• Job lists can be inserted in an existing workpiece directory.
The job list can be modified with the editor.
Notes
You can create your own templates for job lists or standard part
programs/subprograms in the directory \Templates\Manufacturer or
\Templates\User. The data manager always searches the User
directory first, then the Manufacturer directory, and finally the Siemens
directory. Job list templates can be stored according to language and
system.
See Programming operating area: 6.1.5 Templates.
Operator Components/Operating Sequences
2.7
2
Job list
2-71