Siemens SINUMERIK 840Di sl Operating Manual page 361

7
01/2008
Data in
Data from
Manage
data
Log
Data
selection
Series
comm.
Upgrade
© Siemens AG 2008 All rights reserved.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
Horizontal softkeys
Read in archives/files:
• Archive from (directory "Archive" on the hard disk)
• USB local
• Diskette (if available)
Read out archives/files
• Archive to (directory "Archive" on the hard disk)
• USB local
• Diskette (if available)
Files/directories can be created, loaded, saved, deleted or copied and
their attributes can be displayed/changed.
This softkey can only be selected if a log is available, i.e., after a
transmission request has been initiated, a log is generated and the
softkey becomes active.
Current actions, errors and any prompts are displayed in the job list.
Prompts must be acknowledged.
The "Job log" lists, for example, errors that have occurred in data
transmission.
By using the "Data selection" softkey, you can choose the directories
that you wish to have displayed in the "Services" main screen.
Expanded softkey bar:
You can archive data for a series commissioning. The softkey is
password-protected.
To update the SINUMERIK solution line , select "NC" as the archive
content during the series commissioning.
The update function is only available on the SINUMERIK powerline.
This function supports updating of the NC system software. For this
purpose, you can create an update archive.
Services operating area
7.1 Services main screen
7
7-361