Protocol: Program Loading List - Siemens SINUMERIK 840Di sl Operating Manual

4
Machine operating area
4.6 Automatic mode

4.6.4 Protocol: Program loading list

Program
overview
Log
4-136
Additional information
Workpieces/part programs that have been loaded into the NC memory
are marked with ("X") in the "Loaded" column in the
workpiece/program overview.
Function
Error list:
Display of previously loaded programs if errors have occurred during
loading.
Sequence of operations
The "Machine" operating area is selected.
The "Program overview" opens.
The softkey bars change.
Press the "Log" softkey.
The "Job log for program overview" window is opened.
SINUMERIK 840Di sl/840D sl/840D Operating Manual HMI-Advanced (BAD) - 01/2008 Edition
4
01/2008
© Siemens AG 2008 All rights reserved.