Honda CBR125R Owner's Manual page 252

Table of Contents

Advertisement

ALTERNATOR/STARTER CLUTCH
STATOR/CKP SENSOR
REMOVAL
Remove the left crankcase cover (page 11-4).
Remove the grommet.
Remove the CKP sensor bolts, wire guide, CKP sen-
sor, stator mounting bolts and stator from the left
crankcase cover.
INSTALLATION
10 N·m (1.0 kgf·m, 7 lbf·ft)
GROMMET
WIRE GUIDE
10 N·m (1.0 kgf·m, 7 lbf·ft)
Install the stator.
Install and tighten the stator mounting bolts to the
specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
Apply liquid sealant (TB 1215 or equivalent) to the
wire grommet sealing surface and install the grom-
met into the groove.
Install the wire guide and CKP sensor.
Apply 6.5 ± 1.0 mm (0.26 ± 0.04 in) from tip of lock-
ing agent to the CKP sensor bolt threads.
Install and tighten the bolts to the specified torque.
TORQUE: 10 N·m (1.0 kgf·m, 7 lbf·ft)
11-6
CKP SENSOR
GROMMET
CKP SENSOR
STATOR
CKP SENSOR
GROMMET
GUIDE
GUIDE
STATOR
STATOR
BOLTS
BOLTS
STATOR
BOLTS

Advertisement

Table of Contents
loading

Table of Contents