Honda CBR125R Owner's Manual page 148

FUEL SYSTEM (PGM-FI)
IACV INSTALLATION
Turn the slide valve clockwise until lightly seated on
IACV.
Install the IACV aligning its groove with the slide
valve housing pin.
Install the setting plate while aligning the cut-out
with the lug on the IACV as shown.
Install and tighten the IACV setting plate torx screws
to the specified torque.
TORQUE: 2.1 N·m (0.2 kgf·m, 1.5 lbf·ft)
INSTALLATION
Connect the throttle cable to the throttle drum and
throttle cable stay.
5-56
SLIDE VALVE
GROOVE
IACV
Align
SETTING PLATE
THROTTLE CABLE
THROTTLE DRUM
PIN
TORX SCREWS