Cylinder/Piston - Honda CBR125R Owner's Manual

CYLINDER/PISTON

CYLINDER/PISTON
CYLINDER REMOVAL
Remove the cylinder head (page 8-15).
Remove the cam chain guide.
Remove the cam chain tensioner lifter mounting
bolts.
Remove the cam chain tensioner lifter and gasket.
Loosen the water hose band screw and disconnect
the water hose.
Lift the cylinder and remove it, being careful not to
damage the piston with the stud bolts.
• Attach a piece of wire to the cam chain to pre-
vent it from falling into the crankcase.
• Do not strike the cylinder too hard and do not
damage the mating surface with a screwdriver.
9-4
CAM CHAIN GUIDE
TENSIONER LIFTER
GASKET
WATER HOSE
CYLINDER
BOLTS
BAND SCREW