Middle Cowl - Honda CBR125R Owner's Manual

MIDDLE COWL

REMOVAL/INSTALLATION
Remove the following:
– Fuel tank cover (page 2-6)
– Inner cowl (page 2-7)
– Lower cowl (page 2-8)
– Turn signal light (page 19-5)
Release the wires from the clamps.
Remove the screws and bolts.
Release the boss from the grommet of the frame
Be careful not to
and remove the middle cowl by pulling it forward.
damage the tabs
and slits.
Release the speedometer cable from the cable
LEFT SIDE:
guide.
Install the middle cowl in the reverse order of
Route the wires
removal.
properly (page 1-
18).
RIGHT SIDE:
GROMMET
BOLT
BOSS
MIDDLE COWL
LEFT SIDE:
TAB
SCREWS
SLIT
SCREWS
SLIT
CABLE
CABLE GUIDE
CLAMPS
BODY PANELS/EXHAUST SYSTEM
TAB
MIDDLE COWL
CLAMP
GROMMET
BOLT
BOSS
2-9