Honda CBR125R Owner's Manual page 317

SERVICE INFORMATION
GENERAL
• When servicing the rear wheel and suspension, support the motorcycle using a safety stand or hoist.
• A contaminated brake disc or pad reduces stopping power. Discard contaminated pads and clean a contaminated disc
with a high quality brake degreasing agent.
• After the rear wheel installation, check the brake operation by applying the brake pedal.
• Use only tires marked "TUBELESS" and tubeless valves on rim marked "TUBELESS TIRE APPLICABLE".
• Use genuine Honda replacement bolts and nuts for all suspension pivot and mounting point.
• For brake system information (page 15-3).
SPECIFICATIONS
Minimum tire thread depth
Cold tire pressure
Axle runout
Wheel rim runout
Wheel balancer weight
Drive chain
TORQUE VALUES
Driven sprocket nut
Rear axle nut
Rear brake disc bolt
Shock absorber upper mounting bolt
Shock absorber lower mounting nut
Swingarm pivot nut
Drive chain slider screw
Brake hose guide screw
Driven sprocket stud bolt
Step holder mounting bolt
ITEM
Standard
With cargo
Radial
Axial
Size/link
Slack
64 N·m (6.5 kgf·m, 47 lbf·ft)
59 N·m (6.0 kgf·m, 44 lbf·ft)
42 N·m (4.3 kgf·m, 31 lbf·ft)
39 N·m (4.0 kgf·m, 29 lbf·ft)
44 N·m (4.5 kgf·m, 32 lbf·ft)
88 N·m (9.0 kgf·m, 65 lbf·ft)
5.9 N·m (0.6 kgf·m, 4.4 lbf·ft)
4.2 N·m (0.4 kgf·m, 3.1 lbf·ft)
28 N·m (2.9 kgf·m, 21 lbf·ft)
27 N·m (2.8 kgf·m, 20 lbf·ft)
REAR WHEEL/SUSPENSION
STANDARD
–
2
225 kPa (2.25 kgf/cm , 33 psi)
2
225 kPa (2.25 kgf/cm , 33 psi)
–
–
–
–
428/124
25 – 35 (1.0 – 1.4)
U-nut
U-nut
ALOC bolt; replace with a new one.
U-nut
U-nut
Apply locking agent to the threads.
Unit: mm (in)
SERVICE LIMIT
0.8 (0.03)
–
–
0.2 (0.01)
2.0 (0.08)
2.0 (0.08)
60 g max.
–
–
14-3