Honda CBR125R Owner's Manual page 55

Table of Contents

Advertisement

Tighten the exhaust pipe mounting bolt and nut
securely.
Tighten the muffler mounting bolt and nut securely.
After the installation, inspect the exhaust system for
leaks.
STUD BOLT REPLACEMENT
Remove the exhaust pipe/muffler (page 2-13).
Thread two nuts onto the stud and tighten them
together, and use a wrench on them to turn the stud
bolt out.
Install new stud bolts into the cylinder head until it
is fully seated as shown.
Install the exhaust pipe/muffler (page 2-16).
BODY PANELS/EXHAUST SYSTEM
BOLT/NUT/WASHER/
COLLAR/RUBBERS
MUFFLER MOUNTING BOLT/NUT
Fully seated
2-17

Advertisement

Table of Contents
loading

Table of Contents