Honda CBR125R Owner's Manual page 395

SERVICE INFORMATION
GENERAL
• Note the following when replacing the halogen headlight bulb.
– Wear clean gloves while replacing the bulb. Do not put fingerprints on the headlight bulb, as they may create hot
spots on the bulb and cause it to fail.
– If you touch the bulb with your bare hands, clean it with a cloth moistened with alcohol to prevent its early failure.
• Be sure to install the dust cover after replacing the headlight bulb.
• A halogen headlight bulb becomes very hot while the headlight is ON, and remains hot for a while after it is turned OFF.
Be sure to let it cool down before servicing.
• Check the battery condition before performing any inspection that requires proper battery voltage.
• A continuity test can be made with the switches installed on the motorcycle.
• The following color codes are used throughout this section.
Bu = Blue G = Green
Bl = Black Gr = Gray
Br = Brown Lb = Light Blue
SPECIFICATIONS
Bulbs Headlight
Position light
Brake/tail light
Turn signal light
License light
Instrument light
Turn signal indicator
High beam indicator
Neutral indicator
MIL
Fuse
TORQUE VALUES
Turn signal light lens screw
Turn signal light mounting nut
License light cover screw
License light mounting nut
Lg = Light Green
O = Orange
P = Pink
ITEM
Hi
Lo
Except CM type
CM type only
Main fuse
Sub fuse
0.9 N·m (0.1 kgf·m, 0.7 lbf·ft)
8.8 N·m (0.9 kgf·m, 6.5 lbf·ft)
1.0 N·m (0.1 kgf·m, 0.7 lbf·ft)
4.5 N·m (0.5 kgf·m, 3.3 lbf·ft)
LIGHTS/METERS/SWITCHES
R = Red
W = White
Y = Yellow
SPECIFICATION
12 V - 55 W
12 V - 55 W
12 V - 5 W
12 V - 21/5 W
12 V - 21 W x 4
12 V - 23 W x 4
12 V - 5 W
12 V - 1.7 W x 4
12 V - 1.7 W
12 V - 1.7 W
12 V - 1.7 W
LED
30 A
10 A x 4
19-3