Honda CBR125R Owner's Manual page 307

Apply fork fluid to a new O-ring and install it onto
the fork bolt.
Loosely install the fork bolt by pushing it to the fork
Tighten the fork
pipe.
bolt after installing
the fork pipe into
the fork bridges.
INSTALLATION
Install the fork leg through the bottom bridge and
Route the wires
top bridge so that the height from the top bridge
and cables properly
upper surface to the fork pipe end is 32 mm (1.3 in).
(page 1-18).
Tighten the bottom bridge and top bridge pinch
bolts to the specified torque.
TORQUE:
Bottom bridge pinch bolt:
27 N·m (2.8 kgf·m, 20 lbf·ft)
Top bridge pinch bolt:
23 N·m (2.3 kgf·m, 17 lbf·ft)
If the fork bolt is loosened, tighten the fork bolt to
the specified torque.
TORQUE: 23 N·m (2.3 kgf·m, 17 lbf·ft)
FRONT WHEEL/SUSPENSION/STEERING
O-RING
FORK PIPE
32 mm
(1.3 in)
TOP BRIDGE
BOTTOM BRIDGE
PINCH BOLT
FORK BOLT
FORK BOLT
FORK PIPE
TOP BRIDGE
PINCH BOLT
13-25