Throttle Operation - Honda CBR125R Owner's Manual

Install and tighten the bolts securely.
Insert the rear cowl bosses to the grommets of the
fuel tank.
Install the following:
– Fuel tank cover (page 2-6)
– Single seat (page 2-4)

THROTTLE OPERATION

Check for any deterioration or damage to the throt-
tle cable. Check the throttle grip for smooth opera-
tion. Check that the throttle opens and automatically
closes in all steering positions.
If the throttle grip does not return properly, lubricate
the throttle cable, and overhaul and lubricate the
throttle grip housing.
If the throttle grip still does not return
properly,replace the throttle cable.
With the engine idling, turn the handlebar all the
way to the right and left to ensure that the idle
speed does not change. If idle speed increases,
check the throttle grip freeplay and throttle cable
connection.
Measure the throttle grip freeplay at the throttle grip
flange.
FREEPLAY: 2 – 6 mm (1/16 – 1/4 in)
Throttle grip freeplay can be adjusted at either end
of the throttle cable.
Minor adjustment is made with the upper adjuster
at throttle housing adjuster.
Slide the dust cover from the adjuster.
Loosen the lock nut and turning the adjuster.
Tighten the lock nut while holding the adjuster and
reposition the dust cover properly on the adjuster.
Recheck the throttle operation.
Major adjustment is made with the lower adjuster
nut at the throttle body.
Lift and support the fuel tank (page 3-6).
Loosen the lock nut and turn the adjuster.
Tighten the lock nut while holding the adjuster.
Recheck the throttle operation.
Remove the suitable support and close the fuel tank
(page 3-6).
BOLTS GROMMET
BOSS
2 – 6 mm (1/16 – 1/4 in)
LOCK NUT
LOCK NUT
MAINTENANCE
DUST COVER
ADJUSTER
ADJUSTER
3-7