Honda CBR125R Owner's Manual page 332

REAR WHEEL/SUSPENSION
Reposition the left step holder assembly and install
the left step holder mounting bolts.
Tighten the mounting bolts to the specified torque.
TORQUE: 27 N·m (2.8 kgf·m, 20 lbf·ft)
Install the rear wheel (page 14-10).
Lift down the motorcycle from the safety stand or
hoist, and support the motorcycle by your hands as
be preload to the shock absorber and rubber bush-
ings.
Tighten the swingarm pivot nut to the specified
torque.
TORQUE: 88 N·m (9.0 kgf·m, 65 lbf·ft)
Install both swingarm pivot caps.
Adjust the drive chain slack (page 3-16).
14-18
BOLTS
STEP HOLDER
ASSEMBLY
PIVOT NUT
CAP