Honda CBR125R Owner's Manual page 359

INSTALLATION
STEP HOLDER
COTTER PIN
JOINT PIN
27 N·m (2.8 kgf·m, 20 lbf·ft)
Apply grease to the brake pedal pivot sliding area
and install the brake pedal into the right step holder.
Secure the brake pedal with the washer and new
cotter pin.
Connect the brake pedal to the push rod lower joint.
Install the joint pin and new cotter pin.
Install the brake light switch spring to the brake
pedal return spring as shown.
BRAKE LIGHT SWITCH
WASHER
BRAKE PEDAL
RETURN SPRING
BRAKE PEDAL
COTTER PIN/
WASHER
HYDRAULIC BRAKE
BRAKE LIGHT SWITCH SPRING
COTTER PIN
RETURN SPRING
BRAKE PEDAL
SWITCH SPRING
COTTER PIN/JOINT PIN
15-27